DPF

HIUKKASSUODATTIMEN PAKKOREGENEROINTI

Diesel Particle Filter Emergency Regeneration (https://forums.ross-tech.com/index.php?threads/27926/)

- for engine codes: CANA, CANB, CANC, CDYA, CDYB, CDYC

Prerequisites:

- Fuel tank must be at least 1/4 full

- Vehicle in Park/Neutral

- Parking brake on

- Hood is closed

- Engine idling in a well vented area

Warning! - Risk of Fire!

- When performing the Emergency Regeneration, the temperature of the Exhaust System can be as high as 300°C/572°F for as 30 or minutes, please insure the vehicle is in good condition before continuing and there are no combustible materials near the exhaust.

[Select]

[01 - Engine]

[Security Access - 16]

- Enter the Code [27971]

[Do It!]

[Measuring Value Blocks] (MVB)

- Look at Group [104] field (1) must be less than [0.46]*

- Look at Group [104] field (3) must be less than MVB-107, field (1)*

* Any value greater than the above, there is a chance the system will not regenerate and the filter would need to be replaced.

[Basic Settings]

- Enter in Group [226]

- (Diesel Particulate Filter (DPF) service regeneration)

Press [Go!]

Notes: Regeneration may take up to 40 minutes. While the regeneration, the engine speed is maintained at about 1500 U / min.

- Once complete

[Done, Go Back]

And re-check the [Measuring Value Block] Group [104]

- Soot level should be close to 0

Check for fault codes.

Hiukkassuodattimen pesu

Helpoin / lähin löytyi  Hattulasta. Hakivat ja palauttivat DPF pöntön korjaamolle. Hinta luoka n. 320€

DPF PRO Oy https://dpfpro.fi

Hiukkassuodattimen ohjelmallinen vaihto, ei onnistu CDYA koneeseen VCDS:llä

Joko ODIS ohjelmistolla tai sitten uskoisin että VCP eli VAG CAN PRO ohjelmisto osaa nollauksen tehdä. Ainakin tuossa Ross-Techin ohjeessa olevalle CANA moottorille nollaus löytyy VCP:n valikoista. Eli kyseessä on siis 3.0TDI ja moottorin ohjain EDC17CP14